PHARMASD™ (PSD)- Pharmaceutical Spray Dryers
Niro has developed a completely new series of spray dryers dedicated to
manufacturing in the pharmaceutical industry. The new dryers, named PHARMASD™
(PSD) have been designed using standard modules that incorporate all the
required features necessary for cGMP production in the environment of a
pharmaceutical plant.
The philosophy behind the design is that a
combination of standardised modules is built together to meet the requirement
for a specific duty. Therefore, dryers of equal capacity may be completely
different with respect to design, configuration and physical size. This allows
Niro to focus specifically on the needs of the customer and the demands of the
process without physical limitations to the design of the equipment.
Cyclone insulated: Ø 710 mm for PSD-5
The PSD dryers
are designed to use hot air or, when drying non-aqueous compounds, nitrogen as
the drying gas. They can be designed for the drying of a wide range of
compounds that are based on acetone, methylene chloride, ethanol, and other
organic solvents. The drying process and product characteristics vary greatly,
depending on the solvent used.
PHARMASD™ design options
include:
- Equipment for closed cycle operation
- Facilities for hot gas sanitisation
- Specially designed pharmaceutical flanges forduct connections
- Construction materials meeting FDA requirements
- HEPA filters for gas streams
- Special air disperser design
- Swirl cone for chamber access - no chamber door with risk for contamination
- CIP equipment
As with all Niro plant equipment, each system component meets the strictest
requirements and regulatory standards.
The PSD range of pharmaceutical
dryers extends from the PSD-1 with a nominal drying gas rate of 80kg/hr up to
the PSD-7 with a nominal drying gas rate of 4,000kg/hr.